The mast mobile light tower monitoring equipment produced by our factory has the advantages of good shock resistance, large load, low noise, fast lifting, stable performance, small size, light weight, high safety, bright illumination, strong reliability, and convenient installation. The technology has reached the world advanced level. It plays an important role in night rescue and rescue of various natural disasters and emergencies. The products are all made of high-strength special industrial aluminum alloy with complete specifications, and can be designed and produced according to the needs of users to meet the needs of height and load in different fields and occasions.
Technical indicators of high mast mobile light tower monitoring equipment
Material: The high mast mobile light tower monitoring equipment is made of high-strength special industrial aluminum alloy profiles, which are highly corrosion-resistant; the inner wall of the cylinder is sealed and connected by hard oxidation treatment. ;
Pressure holding performance: high-level sealing performance, the lifting mast slides less than 10mm in a 24-hour static state. It adopts the piston sliding stroke inflatable structure, and the piston ring (guide ring) in this structure is made of high-strength graphite-containing PTFE material; all transmission systems are closed, and there are nitrile rubber sealing rings between the rod body and the rod body for sealing , anti-aging, good waterproof and sandproof performance, strong anti-corrosion ability;
Surface treatment: hard oxidation increases the strength of aluminum alloy profiles.
Wind resistance: The rod body of the high mast mobile light tower monitoring equipment adopts a circular cross-section. In the same installation space, the circular cross-section can provide higher strength, stiffness, torsion resistance and bending resistance; the wind resistance level is 8; Rotation function., working pressure ≤ 0.30 Mpa.
The lifting lighting monitoring equipment has two structures of built-in line and external line for customers to choose.
The vehicle-mounted lifting mast of the lifting lighting monitoring equipment is fixed on the roof of the vehicle, or installed on the periphery of the vehicle, and is jointly fixed by the tray and the support frame. When selecting customer equipment, the original height of the vehicle-mounted lifting mast should be determined according to the height from the installation surface to the top. When the product is installed on the roof, its original height is the lowest, ensuring the maximum height passability of the mast mobile light tower and minimizing the wind resistance of the equipment.
The installation method of lifting lighting monitoring equipment is a folding pallet installation, which is generally installed on the top of the vehicle, and the lifting height is below 3.3 meters. Our factory currently has three heights for customers to choose from, 1.8 meters, 2.5 meters, and 3.3 meters. The height in attitude is the height of the mast plus the height of the vehicle. One is the vertical flange installation. If this installation is installed on the periphery of the vehicle, it must be fixed by the flange and the support frame. If it is installed inside the vehicle, it needs to open a hole on the top of the vehicle. The hole must be Do a good job of waterproof sealing to prevent water leakage, and install flanges in the car. There is no limit to the height of this installation method, and the customer can choose according to their needs.
